Trovac Tip Top Parts: A Buyer's Guide to Central Vacuum Fittings & Installation Supplies

Trovac Tip Top Parts: A Buyer's Guide to Central Vacuum Fittings & Installation Supplies

Written by the Vacuum Parts Canada installation supplies team, specialists in central vacuum systems, fittings, and PVC piping components. Reviewed for accuracy against current product listings.

Quick answer: Trovac Tip Top Parts refers to the line of central vacuum installation fittings—PVC elbows, couplings, inlet valves, wall plates, and solvent glue—produced under Trovac Industries, the Canadian manufacturer behind Cyclovac central vacuum systems. These fittings are the standard components used to install or repair a central vacuum system's 2-inch PVC piping network, and they're compatible with most major central vacuum brands, not just Cyclovac. Vacuum Parts Canada carries a full range of these installation fittings and supplies, ready to ship across Canada.

What Are Trovac Tip Top Parts?

Trovac Industries has been manufacturing central vacuum systems and components in Canada for decades, and its "Tip Top" line of fittings covers the plumbing side of a central vacuum installation—the PVC pipe, elbows, couplings, and inlet hardware that route dirt and debris from wall inlets back to the power unit. Because central vacuum systems rely on a standardized 2-inch PVC pipe diameter across the industry, these fittings are built to the same ASTM-style dimensional standards used by other major brands, meaning a Tip Top elbow or coupling will generally fit CanaVac, Cyclovac, DrainVac, and most other central vacuum piping systems.

This universal compatibility is one reason installers and DIY homeowners search specifically for "Trovac Tip Top parts"—they're a trusted, widely available source for fittings regardless of which central vacuum brand is already installed in the home.

Why Fitting Quality Matters

A central vacuum system relies on an airtight seal through its entire pipe network to maintain suction. A cracked elbow, poorly glued coupling, or mismatched fitting can cause suction loss throughout the whole system, not just at one inlet. Using properly rated PVC fittings—rather than generic plumbing-grade parts—ensures the pipe network can handle the airflow and occasional debris impact a working vacuum system generates.

Common Central Vacuum Installation Fittings You'll Need

Part Type	Function	Typical Price
90° Elbow ("L" Fitting)	Standard directional turn in the pipe run	$2.39
90° Short Elbow	Tight-space directional turn	$2.39
Medium 90° Elbow	Directional turn for medium-radius runs	$2.49
90° "T" Fitting	Branches a new inlet off the main line	$2.99
90° Elbow M/F Fitting	Connects male-to-female pipe ends at a turn	$2.99
22.5° Long Elbow	Gentle-angle turn to preserve airflow	$8.93
2" Pipe Cap	Seals the end of an unused pipe run	$1.99
PVC Solvent Glue (60 mL)	Bonds pipe and fittings for an airtight seal	$7.89

Prices reflect current listings at Vacuum Parts Canada and may vary with promotions or stock.

Full Installation Kits: A Faster Option

If you're installing new inlets rather than repairing an existing run, a complete installation kit bundles the fittings, piping, wire, and glue you need into one purchase:

• 1-Inlet Installation Kit — includes an inlet valve, wall back plate, multiple elbows, stop couplings, 50 feet of 24V wire, and PVC glue
• 2-Inlet Wall Mounting Backplate Kit — includes 50 feet of piping, suited to smaller two-zone installations
• 3-Inlet Installation Kit — includes three inlet valves, wall plates, 48 feet of piping, stop couplings, pipe straps, wire, and glue for larger homes

These kits are designed to work across most central vacuum brands, so they're a practical option whether you're finishing new construction, retrofitting an older home, or expanding an existing system to a new room.

DIY Installation vs. Hiring a Professional

Central vacuum piping is generally straightforward enough for a confident DIYer to install, particularly when following a kit's included instructions. However, professional installation is worth considering when:

• Running pipe through finished walls or tight framing where access is limited
• Integrating with an existing central vacuum system of unknown pipe diameter or brand
• Installing in a home with fire code or building code considerations for wall penetrations

For straightforward new-inlet additions or repairs to an existing accessible pipe run, most homeowners can complete the job with a kit and basic tools.

Frequently Asked Questions

What is Trovac Tip Top Parts? Trovac Tip Top Parts refers to the central vacuum installation fittings — PVC elbows, couplings, inlet valves, and glue — manufactured by Trovac Industries, a Canadian central vacuum manufacturer also known for its Cyclovac systems.

Are Tip Top fittings compatible with brands other than Cyclovac? Yes. Central vacuum pipe and fittings follow a standardized 2-inch diameter across the industry, so Tip Top fittings generally fit installations from CanaVac, DrainVac, and most other major central vacuum brands.

What size PVC pipe do central vacuum systems use? The vast majority of residential central vacuum installations use 2-inch outer diameter PVC pipe as the industry standard.

Can I repair just one section of central vacuum pipe instead of replacing the whole run? Yes. A cracked or damaged section can typically be cut out and replaced using a coupling and a short length of matching PVC pipe, without needing to redo the entire pipe run.

Do I need special glue for central vacuum PVC fittings? Yes, a PVC solvent glue formulated for central vacuum pipe and fittings should be used to create an airtight bond; standard plumbing PVC cement can generally be used as well, provided it's rated for the pipe material.

How many inlets does a typical central vacuum system need? Most homes use one inlet per 500–700 square feet of living space, though this varies based on layout — a 3-inlet kit is a common starting point for mid-sized homes.

Where can I buy Trovac Tip Top central vacuum parts in Canada? Central vacuum installation fittings, PVC piping, and complete inlet kits compatible with Tip Top-style parts are available online through Vacuum Parts Canada, with free shipping on orders over $99.

Get the Right Parts for Your Central Vacuum Installation

Whether you're repairing a single fitting or installing a brand-new inlet run, Vacuum Parts Canada carries the elbows, couplings, inlet valves, and complete kits you need, backed by our Best Price Guarantee and free shipping on orders over $99.

Shop Central Vacuum Installation Supplies now, or call our team at 1-855-825-7784 or email info@vacuumpartscanada.ca if you're not sure which fittings match your existing system.

---

About the Author

This guide was researched and written by the product specialists at Vacuum Parts Canada, a Canadian retailer of central vacuum systems, installation supplies, and cleaning equipment. Our team draws on direct product knowledge, manufacturer specifications, and customer feedback to provide accurate, up-to-date buying guidance. Have a question about this article? Contact us — we're happy to help.